热稳定 POM 韩国工程F30-03 南通宝泰菱 POM
韩国工程玻纤增强POM FG2015
韩国工程加纤增强POM FG2025K
韩国工程高增韧POM TE-24S
韩国工程增韧POM FU2020
韩国工程高抗冲击POM FU2015
韩国工程抗冲击POM TE-22
韩国工程塑料POM TG-61
韩国工程塑料POM FT2020
韩国工程塑料POM FC2020H BK
韩国工程填充增强POM TC3020
韩国工程耐磨损级POM TX-11H
韩国工程耐磨损级POM TS-25H
韩国工程耐摩擦性POM TS-25A
韩国工程润滑耐磨POM NX-20
韩国工程耐磨损POM FM2020
韩国工程软质抗冲POM TE-24S
韩国工程软质增韧POM TE-23
韩国工程防静电POM F25-63
韩国工程低黏性POM F40-03
韩国工程中粘性POM F25-03
韩国工程注塑POM F20-03
韩国工程POM黑色导电塑料 ET-20S
韩国工程导电POM原料 ET-20A
韩国工程POM高流动性塑料 F30-03
韩国工程耐磨聚甲醛塑料 F25-03HT
韩国工程高刚性高韧性POM F10-03H
韩国工程高粘度POM F10-02 挤出成型
韩国工程高粘性POM F10-01 挤出专用
韩国工程耐磨POM F15-33 中粘度
韩国工程特殊润滑耐磨级POM TX-21
韩国工程防翘曲及沉积POM FB2030
韩国工程玻璃珠填充尺寸稳定POM
韩国工程黑色加纤POM FG2020
韩国工程加纤增强POM FG2030
韩国工程玻纤增强POM FG2020
韩国工程软质高抗冲击POM TE-21
韩国工程耐冲击POM FU2025
韩国工程软质POM FU2050
韩国工程中粘度POM F20-02
韩国工程铁氟龙耐磨损级POM FL2020
韩国工程抗紫外线POM F20-52
韩国工程高耐磨低噪音POM TX-31
韩国工程玻纤增强POM FG2025
韩国工程高刚性POM F25-03H
POM features:
1, for the crystalline thermoplastic plastic, with an obviousmelting point of 165~175℃, the property of the closest to themetal, the appearance of light yellow or white translucent oropaque, hard and dense, smooth and shiny surface.
2. Inflammable, it can continue to burn after leaving the fire,the oxygen index is 14~16, the upper end of the flame is yellow,the lower end is blue, the melting drops, there is a pungentformaldehyde and fish smell. Note that it is toxic.
3. Small air permeability, only a fraction of PE.
4. The high degree of crystallization leads to a very highshrinkage rate, which can be as high as 2%~3.5%.
5. Excellent mechanical properties, high elastic modulus, lowand stable friction coefficient, good wear resistance andself-lubrication. High hardness and stiffness. Very close to metal.Stable size, small water absorption, small change in repeatedimpact strength, tensile strength and modulus close to steel, goodfatigue strength, high resistance to creep and relaxation.